Request Information Download PDF
GTMG3070-10VV-X.X-PP GTMG3070-10VV-X.X-PP
Information
Model NumberGTMG3070-10VV-X.X-PP
DescriptionGTMG3070-10VV-X.X-PP, Medical Power Supply, Encapsulated in plastic housing, Modular Medical Power Supply, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), Solder Pins 2 * Ø1.05 mm, 3.5 mm Long, 20 mm Center to Center between Pins, Output Rating: 10 Watts, 5-24V in 0.1V increments, Approvals: CE China RoHS cUR GOST-R PSE RoHS 2 Ukraine VCCI WEEE Double Insulation cUL
Agency Documentshttp://www.globtek.info/certs/GTMG3070-WWVV-X.X-PP/
CE EC-Declaration for Medicalhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000MEhUCEA1
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000MEhUCEA1
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeEncapsulated in plastic housing
TechnologyModular Medical Power Supply
CategoryMedical Power Supply
Input Voltage90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz)
I/P Amps (A)0.25A / 115VAC, 0.15A / 230VAC
Wattage (W)10
Vout Range (V)5-24
EfficiencyN/A
Ingress ProtectionIPX0
Size (mm)50.0x22.7x70.0 mm
EnclosureUser-added image
 
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTMG3070-1005-PP 5210 RFQ
GTMG3070-1012-PP 120.839.96 RFQ
GTMG3070-1015-PP 150.669.9 RFQ
GTMG3070-1024-PP 240.4210.08 RFQ
SpecificationsFeatures:
Universal AC input / Full range
Medical safety approval: ANSI / AAMI ES 60601-1 / TUV EN 60601-1: 2006; IEC 60601-1 / 2xMOPP
Isolation class Ⅱ
Green design, No-load power consumption < 0.3W Protection: Short circuit, Over load, Over voltage
Brown-out (Low AC Input Voltage) High operation temperature up to 70°C Withstand 2G vibration test



ELECTRICAL SPECIFICATIONS:
Output
DC Voltage Range: 5V 12V 15V 24V
Rated Current: 2A 0.83A 0.66A 0.42A
Current Range: 0 ~ 2A 0 ~ 0.83A 0 ~ 0.66A 0 ~ 0.42A
Rated Power: 10W 9.96W 9.9W 10.08W
Ripple & Noise (Max.): 80mVp-p 150mVp-p 150mVp-p 240mVp-p
Voltage Tolerance: +5 / -3%
Line Regulation: Note.8 ±1% ±0.5% ±0.5% ±0.5%
Load Regulation: Note.8 ±1% ±0.5% ±0.5% ±0.5%
Setup, Rise Time: 100ms, 25ms / 230VAC, 100ms, 25ms / 115VAC at full load
Hold Up Time: 100ms / 230VAC, 25ms / 115VAC at full load

Input
Voltage Range: 85 ~ 264VAC, 125 ~ 373VDC
Frequency Range: 47 ~ 63Hz
Efficiency (Typ.) at 230VAC: 77% 79% 80% 82%
AC Current (Typ.): 0.25A / 115VAC, 0.15A / 230VAC
Inrush Current (Typ.): Cold Start 25A / 115VAC, 45A / 230VAC

Protection
Over Load: Above 110% rated output power Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage: 115 ~ 145% rated output voltage, Protection type: latch-off mode

Environment
Working Temp.: -20 ~ +70°C (Refer to output load de-rating curve)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp. & Humidity: -40 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient: ±0.03% / °C (0 ~ 50°C)
Vibration: 10 ~ 500Hz, 2G 10min. / 1cycle, period for 60min. each along X, Y, Z axes

Safety & EMC
Safety Standards: Certified UL / cUL (ANSI / AAMI ES 60601-1; CAN / CSA-C22.2 No.60601-1); NFPA 99 Certified TUV (EN 60601-1; IEC 60601-1); MOPP approval
Withstand Voltage: I/P-O/P: 4KVAC
Isolation Resistance: I/P-O/P: 100M Ohms / 500VDC
EMI Conduction & Radiation: Certified EN 55011
Harmonic Current: Certified EN 61000-3-2; EN 61000-3-3
EMS Immunity: Certified EN 60601-1-2; IEC 61000-4-2, 3, 4, 5, 6, 8, 11

Others
MTBF: 210.2K HRS Certified MIL-HDBK-217F
Dimension (WxHxH): 50.0x22.7x70.0 mm / 1.969x0.894x2.756 inch
Packing: 0.105kg; 108pcs/ 12.34kg /1.43CUFT


1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
3. Tolerance: includes setup time tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 10% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
7. Length of setup time is measured at first cold start. Turning ON/OFF the power supply continuously may increase the setup time.
8.The line regulation and load regulation are calculated based on output voltage.
Derating CurveUser-added image

 
Qty (ea.)/Carton108
Individual Box/Gift Box Size (mm)75*55*27
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)12.34
Label Width (mm)TBD
Label Height (mm)TBD
Input Configuration
DescriptionSolder Pins 2 * Ø1.05 mm, 3.5 mm Long, 20 mm Center to Center between Pins
Approvals
LogoDescription
User-added imageAttention Mark / Refer to operating manual for operating and service instructions
User-added image  CE Certification
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added imageUL60950-1, cULus to UL 60950-1 E170507
User-added imageUR 60601-1
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case

Begär information