5V, 3.6A Desktop LPS AC Adapter Power Supply Fullfills requirements for applications of 1-18W and 6,000 units are available from STOCK!

5V, 3.6A Desktop LPS AC Adapter Power Supply Fullfills requirements for applications of 1-18W and 6,000 units are available from STOCK!

GT-41062-1805-T3 18 Watt Family of ITE desktop power supplies with 5V output

Description / Features / Specifications:

GT-41062-1805-T3 ITE grade model represents GlobTek’s 18 Watt desktop series of AC/DC adapters with interchangeable cords. These converters are ideally suited to provide reliable power globally, as it features both, Universal 100-240V input at 47-63 Hz and user-changeable power cords (also available from GlobTek).

This unit features Regulated outputs with built-in overcurrent, short circuit, overvoltage and thermal protection, as well as low leakage, low ripple, and high efficiency.

GlobTek’s GT-41062-1805-T3 series of enclosed power supplies are housed in Impact resistant non-vented Polycarbonate Thermal Conduction-Cooled Cases.

INPUT PLUG CONFIGURATION:EC 60320/C14, 3 PRONGS POWER INLET, CLASS I TYPE
OUTPUT CORD:1 CONDUCTOR + SHIELD, 18 AWG STRANDED WIRE, ROUND # 1185, COLOR BLACK, LENGTH (L) OF CORD: 1000 +100, -0 mm. with MOLDED INLINE FERRITE.
OUTPUT CONNECTOR:STANDARD, RIGHT ANGLE FEMALE BARREL 5.5 x 2.5 x 11 mm WITH CENTER POSITIVE
OUTPUT VOLTAGE:5 VDC, NO LOAD TO FULL LOAD, NO MINIMUM LOAD REQUIRED
OUTPUT CURRENT:3.6 A
OUTPUT POWER (RATED):18 WATTS MAX
OUTPUT REGULATION:+/- 5% MEASURED AT THE OUTPUT CONNECTOR
LINE VOLTAGE REGULATION:+/- 1% TYPICAL MEASURED AT FULL LOAD
OUTPUT RIPPLE
(PEAK TO PEAK):
1% OR 150 mV WHICHEVER IS GREATER. MEASURED AT 20 MHz BANDWIDTH WITH 0.1 μf CERAMIC CAPACITOR IN PARALLEL WITH 10 μf ELECTROLYTIC CAP CONNECTED AT THE END OF OUTPUT CONNECTOR AT NOMINAL LINE
TURN-ON/TURN-OFF OVERSHOOT:5% MAXIMUM, 1mS TYPICAL RECOVERY TIME FOR 25% STEP LOAD
TURN-ON DELAY:1 SECOND, TYPICAL
HOLD-UP TIME:8mS TYPICAL AT NOMINAL INPUT VOLTAGE AND FULL LOAD
INRUSH CURRENT:30A TYPICAL AT 115Vac INPUT AND 60A TYPICAL AT 230Vac INPUT
SWITCHING FREQUENCY:65 KHz TYPICAL
PROTECTION:
OVER-VOLTAGE:PROTECTED WITH ZENER CLAMP ACROSS OUTPUT
SHORT CIRCUIT:PROTECTED, UNIT WILL RECOVER UPON REMOVAL OF FAULT
INPUT PROTECTION:INPUT LINE FUSING
SAFETY:
DIELECTRIC WITHSTAND VOLTAGE:4242Vdc FROM PRIMARY TO SECONDARY
EARTH LEAKAGE CURRENT:< 3.5 mA at 240Vac INPUT VOLTAGE
OTHER:
MTBF:200,000 HOURS AT 25°C AMBIENT TEMPERATURE
OPERATING TEMPERATURE:0°C TO 40°C AMBIENT TEMPERATURE
HUMIDITY:0% TO 90% RELATIVE HUMIDITY
STORAGE TEMPERATURE:-40°C TO 80°C
ROHS:COMPLIES WITH EU 2002/95/EC AND CHINA SJ/T 11363-2006

Certifications / Approvals / Safety Compliance:

  • UL60950-1, CUL TO 22.2#60950-1, SIQ MARK TO 60950-1
  • CCC TO GB4943-2001, GB9254-1998, GB17625.1-2003
  • CE CLASS I, AS/NZ 60950, PSE TO J60950, CB REPORT TO 60950-1 2ND EDITION
  • IRAM (ARGENTINA) TO EN60950
  • EMI: COMPLIES WITH EN55022 CLASS B AND FCC PART 15 CLASS B, VCCI WHEN TESTED WITH RESITIVE LOAD, BOTH CONDUCTED AND RADIATED EMI
  • CE MARK: TESTED TO COMPLY WITH EN61000-3-2 EN610003-3 AND EN50082-1 INCLUDING EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • C-TICK TESTED TO COMPLY WITH AUSTRALIA SECTION 182 OF THE RADIO COMMUNICATION ACT OF 1992.

Our certification is accepted by the OSHA Nationally Recognized Testing Laboratory (NRTL) Program which is required for demonstrating compliance to UL standards for switching power supplies.

Options:

Local China to China delivery is available upon request.

Industry – Leading 5 year warranty!

Applications:

This family of Industry’s high density AC-DC converters is suitable for most applications requiring DC power which include industrial, marine, consumer or medical devices, portable medical treatment and monitoring equipment & instruments, hospital equipment and fixtures, Lighting and Support Equipment, medium and high power appliances or consumer products, VOIP phones and telecom equipment and are a perfect power source for rapid Li-Ion and other emerging chemistries battery charging.

Company:

GlobTek is a power systems solutions provider with design and manufacturing facilities in the USA and China with sales offices in Germany, France, and the UK. Offering a line of power supplies, energy systems, PoEs, LED drivers, power cords, battery packs and many other power-related products and services for applications from gym equipment to medical systems, GlobTek can also develop and create custom power solutions for just about any requirement. As an ISO-13485 certified manufacturer of medical devices, GlobTek specializes in World-Wide safety compliant and ruggedized standard, modified and custom products at an unbeatable cost vs. quality ratio!

GlobTek’s Headquarters including R&D, Engineering, Warehousing, Sales & Marketing, Testing and Assembly is located at 186 Veterans Drive, Northvale NJ 07647. For more information call 201-784-1000 or visit GlobTek online at www.globtek.com

Desktop strömförsörjning ITE strömförsörjning

Request Info

  • ABSTRACT:
When a large inductive load such as a DC motor or a solenoid controlled valve is placed on the output of the power supply, at certain points of the load operation current/energy may be returned... PSU Back EMF Option, for GlobTek EL6 design series products
  • GlobTek now offers a 5A rated MicroUSB (USB Micro-B) connector along with Power supplies utilizing this connector with output currents up to 5A. Popular custom voltages are available from 4-5.95V but any... GlobTek offers MicroUSB (USB Micro-B) connectors with up to 5A current ratings for high current applications, 451-02180281(R)
  • ESD Testing Method,
	for Class II Input Medical Devices
	GlobTek, May 6,
	2019, Dave Love
	
	

Abstract:
With the latest 4th edition of the medical EMC standard 60601-1-2, 4th Ed, the ESD test levels... ESD Testing Method, for Class II Input Medical Devices
  • GlobTek erbjudar ett stort mångfald av IEC 60335-1 hushåll godkända strömförsörjningar.


Den internationella standard 60335-1 täcker säkerheten för hushålls – och motsvarande apparater med... 60335-1 , hushåll certifiserade strömförsörjningar är nu tilgängliga i olika storlekar som standard modeller .
  • AS/NZ 60950 Certification is required for Switching power supplies to be imported independently or with a system into Australia or New Zealand per the Australian State Acts & Regulations (eg NSW Electricity... GlobTek ITE, Medical, and household use power supplies are certified to AS/NZ 60950 and are ideal for use with equipment to be exported to Australia
  • GlobTek offers a wide range of power supplies fitted with USB type connectors. Due to special application needs, higher voltages may be required to accommodate voltage drop or high current carrying capability. Standard USB power supplies with output voltages above 5V available in 5.1V, 5.2V, 5.3V, 5.4V, and 5.5V for Medical, ITE, and household use.
  • GlobTek offers customer specific termination options for it's wide range of Medical, ITE, and household use power supplies as well as cable assemblies and wire harnesses. As part of it's offering, GlobTek... XLR connectors available in Male or Female configuration both in mechanically attached and overmolded configurations on GlobTek Medical, Household use, and ITE power supplies
  • Globtek can provide up to seven QC3.0 output power profiles for our GTM96605 USB adaptive power
products. Six of the USB3.0 power profiles are normally provided as follows:
5V/4.6A, 5.8V/4.6A, 9V/4.4A,... USB Type C Adaptive Power supply adapter/rapid charger supports USB PD 2.0/3.0, QC 2.0/3.0, QC 4.0/4.0+ and offers Special/custom Output Voltages, Model family GTM96605
  • GlobTek's GTM961800P 180W Desktop provides up to 300W surge handling capacity for up to a minute for applications with a 120V input option and up to 500W for 230V only applications. This is ideal for motor... 180W Desktop power supplies provide up to 300W peak power @ 120V input and up to 500W at 230V, Medical, ITE, and Household use certified
  • GlobTek is introducing 3 new waterproof locking barrel connectors that will be molded equivalents to the Switchcraft® part numbers listed below:

GlobTek code CLW:
Female Barrel 5.5 * 2.1 barrel w/thumbscrew;... GlobTek is introducing 3 new waterproof locking barrel connectors
  • GlobTek offers the following plugs to meet the requirements in South Africa:

PN: Q-SANS64-1-16A(R) Color: Black, SABS164-1 3 round prongs
PN: Q-SANS164-4L-16A(R) – Color: Blue, SABS164-4, +53º
PN:... GlobTek offers South African SABS164-1 and SABS164-4 Plugs in 3 versions 0º (red), +53º (blue) and -53º (black) for the Q-style wall plug in power supplies for Medical, ITE, and household use.
  • Globtek can provide up to seven USB PD2.0/3.0 output power profiles for our GTM96605 USB adaptive
power products. Six of the USB PD2.0/3.0 power profiles are normally provided as follows:
5V/4.6A, 5.8V/4.6A,... USB Adaptive Power Supply offers Special Output Voltages option at 60W power level and complies with USB PD2.0/3.0 protocol as well as QC2.0/3.0
  • Call
    Email
    💬
    Text
    💁
    Chat
    ?
    Begär en offert
    Kan vi hjälpa dig?
    Kan vi hjälpa dig?