Li-Ion Chargers comply with CEC and DOE Level VI and offer 3 charge stages

Li-Ion Chargers comply with CEC and DOE Level VI and offer 3 charge stages Li-Ion Chargers comply with CEC and DOE Level VI and offer 3 charge stages

GlobTek announces availability of a high energy efficiency Li-Ion battery charger product family. The GTM91128 family has options for 1 cell, 2 cell or 3 cell Li-Ion charging. The family has been qualified to the California Energy Commission (CEC) and the Department of Energy (DOE) regulations for Battery Chargers. Compliance to the CEC battery charger regulations has been mandatory for consumer products for several years, and for all products (exempting medical products) since January 2017. The DOE regulations which go into effect on June 13 of 2018 will preempt the CEC regulations on that date.

The GTM91128 series of Li-Ion Chargers are available in versions delivering 4.2V, 8.4V, or 12.6V at 1-1.5 A to address single- or multiple-battery configurations, the GTM91128 families of smart Li-Ion battery chargers from GlobTek offer three charging methods: conditioning, constant current, and constant voltage. The universal-input devices have a minimum current charge termination technique with timer as back up, with LED indication of charging and fully charged states. An additional feature of the smart battery charger family is that they have user-interchangeable plugs for seamless international operation.

“Today’s smart devices require smart battery systems to run them, and our GTM91128 family of battery chargers gives you the flexibility to charge single or multiple sets of batteries with intelligent management”, Ed Seaman, GlobTek VP of Sales, points out. “In addition, the ability to provide guaranteed international compatibility to the customer significantly simplifies infrastructure issues from inventory to regulatory.”

Additional features of the GTM91128 battery charger family include built-in over charge and damaged-cell detection, with a battery over-temperature protection option also available. A custom battery cradle can also be designed for specific battery form factor, if desired. All appropriate safety and EMC approvals are done and available.

These Globtek Li-Ion battery chargers have international safety approvals for most application space, including IEC 60601-1, IEC 60950-1, IEC 60335-1 and IEC 61558-1. Please contact a GlobTek sales team member, for price and availability of this product.

Batteriladdare

Request Info

  • ABSTRACT:
When a large inductive load such as a DC motor or a solenoid controlled valve is placed on the output of the power supply, at certain points of the load operation current/energy may be returned... PSU Back EMF Option, for GlobTek EL6 design series products
  • GlobTek now offers a 5A rated MicroUSB (USB Micro-B) connector along with Power supplies utilizing this connector with output currents up to 5A. Popular custom voltages are available from 4-5.95V but any... GlobTek offers MicroUSB (USB Micro-B) connectors with up to 5A current ratings for high current applications, 451-02180281(R)
  • ESD Testing Method,
	for Class II Input Medical Devices
	GlobTek, May 6,
	2019, Dave Love
	
	

Abstract:
With the latest 4th edition of the medical EMC standard 60601-1-2, 4th Ed, the ESD test levels... ESD Testing Method, for Class II Input Medical Devices
  • GlobTek erbjudar ett stort mångfald av IEC 60335-1 hushåll godkända strömförsörjningar.


Den internationella standard 60335-1 täcker säkerheten för hushålls – och motsvarande apparater med... 60335-1 , hushåll certifiserade strömförsörjningar är nu tilgängliga i olika storlekar som standard modeller .
  • AS/NZ 60950 Certification is required for Switching power supplies to be imported independently or with a system into Australia or New Zealand per the Australian State Acts & Regulations (eg NSW Electricity... GlobTek ITE, Medical, and household use power supplies are certified to AS/NZ 60950 and are ideal for use with equipment to be exported to Australia
  • GlobTek offers a wide range of power supplies fitted with USB type connectors. Due to special application needs, higher voltages may be required to accommodate voltage drop or high current carrying capability. Standard USB power supplies with output voltages above 5V available in 5.1V, 5.2V, 5.3V, 5.4V, and 5.5V for Medical, ITE, and household use.
  • GlobTek offers customer specific termination options for it's wide range of Medical, ITE, and household use power supplies as well as cable assemblies and wire harnesses. As part of it's offering, GlobTek... XLR connectors available in Male or Female configuration both in mechanically attached and overmolded configurations on GlobTek Medical, Household use, and ITE power supplies
  • Globtek can provide up to seven QC3.0 output power profiles for our GTM96605 USB adaptive power
products. Six of the USB3.0 power profiles are normally provided as follows:
5V/4.6A, 5.8V/4.6A, 9V/4.4A,... USB Type C Adaptive Power supply adapter/rapid charger supports USB PD 2.0/3.0, QC 2.0/3.0, QC 4.0/4.0+ and offers Special/custom Output Voltages, Model family GTM96605
  • GlobTek's GTM961800P 180W Desktop provides up to 300W surge handling capacity for up to a minute for applications with a 120V input option and up to 500W for 230V only applications. This is ideal for motor... 180W Desktop power supplies provide up to 300W peak power @ 120V input and up to 500W at 230V, Medical, ITE, and Household use certified
  • GlobTek is introducing 3 new waterproof locking barrel connectors that will be molded equivalents to the Switchcraft® part numbers listed below:

GlobTek code CLW:
Female Barrel 5.5 * 2.1 barrel w/thumbscrew;... GlobTek is introducing 3 new waterproof locking barrel connectors
  • GlobTek offers the following plugs to meet the requirements in South Africa:

PN: Q-SANS64-1-16A(R) Color: Black, SABS164-1 3 round prongs
PN: Q-SANS164-4L-16A(R) – Color: Blue, SABS164-4, +53º
PN:... GlobTek offers South African SABS164-1 and SABS164-4 Plugs in 3 versions 0º (red), +53º (blue) and -53º (black) for the Q-style wall plug in power supplies for Medical, ITE, and household use.
  • Globtek can provide up to seven USB PD2.0/3.0 output power profiles for our GTM96605 USB adaptive
power products. Six of the USB PD2.0/3.0 power profiles are normally provided as follows:
5V/4.6A, 5.8V/4.6A,... USB Adaptive Power Supply offers Special Output Voltages option at 60W power level and complies with USB PD2.0/3.0 protocol as well as QC2.0/3.0
  • Call
    Email
    💬
    Text
    💁
    Chat
    ?
    Begär en offert
    Kan vi hjälpa dig?
    Kan vi hjälpa dig?