WEEE Directive 2002/96/EC för EU

WEEE Directive 2002/96/EC för EU

The Waste Electrical & Electronic Equipment (WEEE) Directive. This directive is aimed at reducing waste of electrical and electronic equipment and promoting reuse and recycling of the equipment by establishing the target of reuse and recycling as a percentage of weight. GlobTek’s customers typically export to the European Union and in anticipation of GlobTek’s customer’s forthcoming compliance with WEEE the “trash can” logo has been added to all products suitable for use in Europe. The “trash can” symbology readily available on GlobTek products will allow customer’s to quickly comply with WEEE marking requirements as the power supply, a main component is marked in compliance. Customers should familiarize themselves with the WEEE directive as the requirements for reuse and recycling of GlobTek’s products which ship attached to final systems will be the responsibility of the manufacturer of the system or the importer into the European Union. Also, marking on the power supply alone is not enough to comply with WEEE.

In reference to Medical Products and Medical Grade power supplies:

Recovery and reuse and recycling limits for medical products were established December 31, 2008. Currently, the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive (2002/95/EC) does not require the medical industry to follow this requirement. However, the European Commission may revisit this exception by February 13, 2005. The RoHS Directive states that it “. . . shall ensure that, from 1 July 2006, new electrical and electronic equipment put on the market does not contain lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), or polybrominated diphenyl ethers (PBDE)."

Request Info

  • ABSTRACT:
When a large inductive load such as a DC motor or a solenoid controlled valve is placed on the output of the power supply, at certain points of the load operation current/energy may be returned... PSU Back EMF Option, for GlobTek EL6 design series products
  • GlobTek now offers a 5A rated MicroUSB (USB Micro-B) connector along with Power supplies utilizing this connector with output currents up to 5A. Popular custom voltages are available from 4-5.95V but any... GlobTek offers MicroUSB (USB Micro-B) connectors with up to 5A current ratings for high current applications, 451-02180281(R)
  • ESD Testing Method,
	for Class II Input Medical Devices
	GlobTek, May 6,
	2019, Dave Love
	
	

Abstract:
With the latest 4th edition of the medical EMC standard 60601-1-2, 4th Ed, the ESD test levels... ESD Testing Method, for Class II Input Medical Devices
  • GlobTek erbjudar ett stort mångfald av IEC 60335-1 hushåll godkända strömförsörjningar.


Den internationella standard 60335-1 täcker säkerheten för hushålls – och motsvarande apparater med... 60335-1 , hushåll certifiserade strömförsörjningar är nu tilgängliga i olika storlekar som standard modeller .
  • AS/NZ 60950 Certification is required for Switching power supplies to be imported independently or with a system into Australia or New Zealand per the Australian State Acts & Regulations (eg NSW Electricity... GlobTek ITE, Medical, and household use power supplies are certified to AS/NZ 60950 and are ideal for use with equipment to be exported to Australia
  • GlobTek offers a wide range of power supplies fitted with USB type connectors. Due to special application needs, higher voltages may be required to accommodate voltage drop or high current carrying capability. Standard USB power supplies with output voltages above 5V available in 5.1V, 5.2V, 5.3V, 5.4V, and 5.5V for Medical, ITE, and household use.
  • GlobTek offers customer specific termination options for it's wide range of Medical, ITE, and household use power supplies as well as cable assemblies and wire harnesses. As part of it's offering, GlobTek... XLR connectors available in Male or Female configuration both in mechanically attached and overmolded configurations on GlobTek Medical, Household use, and ITE power supplies
  • Globtek can provide up to seven QC3.0 output power profiles for our GTM96605 USB adaptive power
products. Six of the USB3.0 power profiles are normally provided as follows:
5V/4.6A, 5.8V/4.6A, 9V/4.4A,... USB Type C Adaptive Power supply adapter/rapid charger supports USB PD 2.0/3.0, QC 2.0/3.0, QC 4.0/4.0+ and offers Special/custom Output Voltages, Model family GTM96605
  • GlobTek's GTM961800P 180W Desktop provides up to 300W surge handling capacity for up to a minute for applications with a 120V input option and up to 500W for 230V only applications. This is ideal for motor... 180W Desktop power supplies provide up to 300W peak power @ 120V input and up to 500W at 230V, Medical, ITE, and Household use certified
  • GlobTek is introducing 3 new waterproof locking barrel connectors that will be molded equivalents to the Switchcraft® part numbers listed below:

GlobTek code CLW:
Female Barrel 5.5 * 2.1 barrel w/thumbscrew;... GlobTek is introducing 3 new waterproof locking barrel connectors
  • GlobTek offers the following plugs to meet the requirements in South Africa:

PN: Q-SANS64-1-16A(R) Color: Black, SABS164-1 3 round prongs
PN: Q-SANS164-4L-16A(R) – Color: Blue, SABS164-4, +53º
PN:... GlobTek offers South African SABS164-1 and SABS164-4 Plugs in 3 versions 0º (red), +53º (blue) and -53º (black) for the Q-style wall plug in power supplies for Medical, ITE, and household use.
  • Globtek can provide up to seven USB PD2.0/3.0 output power profiles for our GTM96605 USB adaptive
power products. Six of the USB PD2.0/3.0 power profiles are normally provided as follows:
5V/4.6A, 5.8V/4.6A,... USB Adaptive Power Supply offers Special Output Voltages option at 60W power level and complies with USB PD2.0/3.0 protocol as well as QC2.0/3.0
  • Call
    Email
    💬
    Text
    💁
    Chat
    ?
    Begär en offert
    Kan vi hjälpa dig?
    Kan vi hjälpa dig?